Barriers to Circular Economy Adoption by Manufacturing Industries: Empirical Evidence from Tanzania
DOI:
https://doi.org/10.13135/2704-9906/12599Keywords:
Circular Economy, Industrial Ecology, Pollution, Structural Equation ModelingAbstract
This study examined the level of circular economy (CE) practices, and barriers influencing their adoption among manufacturing industries in Tanzania. Using a mixed-methods approach, data were collected from manufacturing firms (n = 101) using a structured questionnaire and analysed using descriptive statistics and Structural Equation Modelling (SEM), complemented by a qualitative content analysis. The findings revealed generally low levels of CE implementation, primarily characterised by the transition from non-renewable to renewable energy sources as well as the recycling of plastics and metal wastes into value added products. CFA and SEM were employed to evaluate the measurement and structural models. The model demonstrated good fit, with indices (CMIN/DF = 1.545, CFI = 0.960, TLI = 0.952, SRMR = 0.040, RMSE = 0.073) falling within acceptable thresholds. All factor loadings were statistically significant (p < 0.001) and exceeded 0.50, confirming the validity of the measurement model. Reliability and convergent validity were also established, with Cronbach’s alpha, composite reliability, and average variance extracted values surpassing 0.50. The SEM results indicated that cultural, regulatory, and financial barriers do not have a statistically significant influence on CE adoption (p > 0.05), suggesting that these factors are not primary constraints in this context. In contrast, technological barriers were found to have a significant effect (p < 0.05), highlighting the critical role of technological capacity in facilitating CE implementation. These findings imply that efforts to accelerate CE adoption in Tanzania and similar Sub-Saharan African contexts should prioritise technological innovation, infrastructure development, and supportive financial mechanisms rather than focusing primarily on cultural or regulatory change. The study provides important policy implications, recommending the development of targeted guidelines, incentives, and enforcement mechanisms to promote resource efficiency, waste minimisation, and cleaner production. While limited by a relatively small sample size, the study offers valuable evidence for policy formulation and industrial planning, and suggests the need for future research with larger samples to further validate and extend the findings.
References
Alizadeh, M., Kashef, A., Wang, Y., Wang, J., Okudan, G. E., & Ma, J. (2023). Circular economy conceptualization using text mining analysis. 35, 643–654. https://doi.org/10.1016/j.spc.2022.12.016
Agyapong, D., & Tweneboah, G. (2023). The antecedents of circular economy financing and investment supply: The role of financial environment. Cleaner Environmental Systems, 8, 100103. https://doi.org/10.1016/j.cesys.2022.100103
Allmbfi, B. R., Gonzalez, M. A., & Raber, E. (1996). Implementing industrial ecology and design for environment practices: Lawrence Livermore National Laboratory. 37–59.
Anderluh, A., Hackl, R., Mesbahi, Z., Pellegrini, T., & Raffler, C. (2025). Consumers’ affinity to the circular economy: Empirical evidence utilizing the circular economy cube. Journal of Cleaner Production, 525, 146539. https://doi.org/10.1016/j.jclepro.2025.146539
Appiah, M. K., Sam, A., Osei-Agyemang, V., Nsowah, A., & Karikari, M. (2023). Green culture, environmental innovativeness, green intellectual capital and circular economy implementation behaviour: A sequential mediation model. Cogent Engineering, 10(1). https://doi.org/10.1080/23311916.2023.2220496
Arfasa, G. F., Tilahun, Z. A., & Kejela, M. D. (2026). Towards zero-waste cities: Leveraging circular economy strategies for municipal solid waste management and pollution mitigation in East Africa - A systematic review. Next Sustainability 7, 100228, 1-15.
Awodele, I. A., Eze, E. C., Municio, A.M. G., Ramabodu, M. S., & Olatunde, N. A. (2025). Advancing circular economy transition in the Nigeria construction industry through digital twin technology adoption. Green Technologies and Sustainability, 3, 100201. https://doi.org/10.1016/j.grets.2025.100201
Baah, C., Afum, E., & Agyabeng-Mensah, Y. (2022). Stakeholder influence on adoption of circular economy principles: Measuring implications for satisfaction and green legitimacy. 91–111.
Babkin, A., Shkarupeta, E., Tashenova, L., Malevskaia-Malevich, E., & Shchegoleva, T. (2023). cluster ecosystems in a circular economy. Journal of Open Innovation: Technology, Market, and Complexity, 9(2), 100071. https://doi.org/10.1016/j.joitmc.2023.100071
Bentler, P. M. (1990). Comparative fit indexes in structural models. Psychological Bulletin, 107(2), 234-246.
Bigerna, S., Micheli, S., & Polinori, P. (2021). New generation acceptability towards durability and repairability of products: Circular economy in the era of the 4th industrial revolution. Technological Forecasting and Social Change, 165(May 2020), 120558. https://doi.org/10.1016/j.techfore.2020.120558
Christmann, A., & Van Aelst, S. (2006). Robust estimation of Cronbach’s alpha. Journal of Multivariate Analysis, 97(7), 1660–1674. https://doi.org/10.1016/j.jmva.2005.05.012
Chumiran, M. H., Abidin, S. Z., Anwar, R., Vermol, V. V., & Sirat, A. (2020). 3R evokes ecodesign identity in ecological system of green manufacturing. International Journal of Supply Chain Management, 9(3), 182–190.
Dace, E., Cascavilla, A., Bianchi, M., Chioatto, E., Zecca, E., Ladu, L., & Yilan, G. (2024). Barriers to transitioning to a circular bio-based economy: Findings from an industrial perspective. Sustainable Production and Consumption, 48, 407-418. https://doi.org/10.1016/j.spc.2024.05.029
De Melo, T. A. C., De Oliveira, M. A., De Sousa, S. R. G., Vieira, R. K., & Amaral, T. S. (2022). Circular Economy Public Policies: A Systematic Literature Review. Procedia Computer Science, 204, 652–662. https://doi.org/10.1016/j.procs.2022.08.079
Demko-Rihter, J., Sassanelli, C., Pantelic, P., & Anisic, Z. (2023). A framework to assess manufacturers’ circular economy readiness level in developing countries: An application case in a Serbian packaging company. Sustainability 15, 698doi.org/10.3390/su15086982 .
Despeisse, M., Ball, P. D., Evans, S., & Levers, A. (2012). Industrial ecology at factory level – a conceptual model. Journal of Cleaner Production, 31, 30–39. https://doi.org/10.1016/j.jclepro.2012.02.027
Durdyev, S., Ismail, S., Ihtiyar, A., Abu Bakar, N. F. S., & Darko, A. (2018). A partial least squares structural equation modeling (PLS-SEM) of barriers to sustainable construction in Malaysia. Journal of Cleaner Production, 204, 564–572. https://doi.org/10.1016/j.jclepro.2018.08.304
European Commission. (2015). Closing the loop: An EU action plan for the circular economy (COM(2015) 614 final). https://www.eea.europa.eu/policy-documents/com-2015-0614-final
Ferraz, B. M., Moltschanov, A., Meldt, L., & de Carvalho, M. M. (2025). Enabling technologies for circular economy transition: Cases in the manufacturing industry. Systems, 13(10), 865. https://doi.org/10.3390/systems13100865
Gazzola, P., Pezzetti, R. R., & Amelio, S. (2024). Sustainable fashion in the circular economy paradigm: Reduce, reuse and recycle as the new sustainable corporate strategy. European Journal of Social Impact and Circular Economy. https://doi.org/10.13135/2704-9906/10383
Gedam, V. V., Raut, R. D., de Sousa Jabbour, A. B. L., Tanksale, A. N., & Narkhede, B. E. (2021). Circular economy practices in a developing economy: Barriers to be defeated. Journal of Cleaner Production, 311. https://doi.org/10.1016/j.jclepro.2021.1276
Gonella, L. dos S. J., Filho, M. G., Campos, L. M. de S., & Ganga, G. M. D. (2024). People’s awareness and behaviours of circular economy around the world: literature review and research agenda. Sustainability Accounting, Management and Policy Journal, 15(5), 1118-1154. https://doi.org/10.1108/SAMPJ-08-2022-0413
Gwakabale, C. A., Monela, G. C., & Temu, B. J. (2025). Exploration of circular economy practices in wood products value chains: Awareness, existing practices and perceived levels of adoption in Mufindi district, Tanzania. Next Sustainability 6, 100182.
Hair, J. F., Howard, M. C., & Nitzl, C. (2020). Assessing measurement model quality in PLS-SEM using confirmatory composite analysis. Journal of Business Research, 109(August 2019), 101–110. https://doi.org/10.1016/j.jbusres.2019.11.069
Hariyani, D., & Mishra, S. (2022). Organizational enablers for sustainable manufacturing and industrial ecology. Cleaner Engineering and Technology, 6, 100375. https://doi.org/10.1016/j.clet.2021.100375
Hauff, M. Von, & Wilderer, Æ. P. A. (2008). Industrial ecology: Engineered representation of sustainability. 103–115. https://doi.org/10.1007/s11625-007-0037-6
Heyes, G., Sharmina, M., Mendoza, J. M. F., Gallego-Schmid, A., & Azapagic, A. (2018). Developing and implementing circular economy business models in service-oriented technology companies. Journal of Cleaner Production, 177, 621–632. https://doi.org/10.1016/j.jclepro.2017.12.168
Hira, A., & Hassall, J. (2022). Sustainable and Environmental Pollution Programme (SMEP): A circular economy experiment in the Global South. 38(3), 287–309. https://doi.org/10.1177/0169796X221106013
Hu, L., & Bentler, P. M. (1998). Fit indices in covariance structure modeling: Sensitivity to underparameterized model misspecification. Psychological Methods, 3(4), 424–453. https://doi.org/10.1037//1082-989x.3.4.424
Jabeen, G., Yan, Q., Ahmad, M., Fatima, N., & Qamar, S. (2019). Consumers’ intention-based influence factors of renewable power generation technology utilization: A structural equation modeling approach. Journal of Cleaner Production, 237, 117737. https://doi.org/10.1016/j.jclepro.2019.117737
Kaseva, M. E., & Gupta, S. K. (1996). Recycling - an environmentally friendly and income generating activity towards sustainable solid waste management. Case study - Dar es Salaam City, Tanzania. Resources, Conservation and Recycling 17, 299-309.
van Langen, S. K., Vassillo, C., Ghisellini, P., Restaino, D., Passaro, R., & Ulgiati, S. (2021). Promoting circular economy transition: A study about perceptions and awareness by different stakeholders groups. Journal of Cleaner Production, 316(July), 128166. https://doi.org/10.1016/j.jclepro.2021.128166
Kirchherr, J., Reike, D., & Hekkert, M. (2017). Conceptualizing the circular economy: An analysis of 114 definitions. Resources, Conservation and Recycling, 127(April), 221–232. https://doi.org/10.1016/j.resconrec.2017.09.005
Kolade, O., Oyinlola, M., Ogunde, O., Ilo, C., & Ajala, O. (2024). Digitally enabled business models for a circular plastic economy in Africa. Environmental Technology & Innovation, 35, 103657. https://doi.org/10.1016/j.eti.2024.103657
Kolade, O., Odumuyiwa, V., Abolfathi, S., Schroder, P., Wakunuma, K., Akanmu, I., Whitehead, T., Tijani, B., & Oyinlola, M. (2022). Technology acceptance and readiness of stakeholders for transitioning to a circular plastic economy in Africa. Technological Forecasting & Social Change, 183, 121954. https://doi.org/10.1016/j.techfore.2022.121954
Kurniawan, T. A., Othman, M. H. D., Hwang, G. H., & Gikas, P. (2022). Unlocking digital technologies for waste recycling in Industry 4.0 era: A transformation towards a digitalization-based circular economy in Indonesia. Journal of Cleaner Production, 357, 131911. https://doi.org/10.1016/j.jclepro.2022.131911
Korsunova, A., Halme, M., Kourula, A., Lev, J., & Lima-Toivanen, M. (2022). Necessity-driven circular economy in low-income contexts: How informal sector practices retain value for circularity. 76(August). https://doi.org/10.1016/j.gloenvcha.2022.102573
Lieder, M., & Rashid, A. (2016). Towards circular economy implementation: a comprehensive review in context of manufacturing industry. Journal of Cleaner Production, 115, 36-51.
Lieder, M., Asif, F. M. A., Rashid, A., & Kotnik, S. (2017). Towards circular economy implementation in manufacturing systems using a multi-method simulation approach to link design and business strategy. 1953–1970. https://doi.org/10.1007/s00170-017-0610-9
Lyakurwa, F. S. (2023). Drivers for, and barriers to solar energy use by manufacturing Micro Small and Medium Enterprises (MSMEs) in Tanzania. Renewable Energy and Sustainable Development, 9(1), 21–30. https://doi.org/10.21622/RESD.2023.09.1.021
Mishra, R., Singh, R. K., & Govindan, K. (2022). Barriers to the adoption of circular economy practices in Micro, Small and Medium Enterprises: Instrument development, measurement and validation. Journal of Cleaner Production, 351(1), 131389. https://doi.org/10.1016/j.jclepro.2022.131389
Mishra, S., Sahoo, D., & Mohapatra, S. (2025). Barriers to circular economy adoption in MSMEs: A WINGS analysis of challenges in developing economies. Circular Economy and Sustainability, 5, 4919-4944. https://doi.org/10.1007/s43615-025-00668-3
Mutezo, G., & Mulopo, J. (2021). A review of Africa’s transition from fossil fuels to renewable energy using circular economy principles. Renewable and Sustainable Energy Reviews, 137, 110609. https://doi.org/10.1016/j.rser.2020.110609
Nijman-Ross, E., Umutesi, J. U., Turay, J., Shamavu, D., Atanga, W. A., & Ross, D. L. (2022). Toward a preliminary research agenda for the circular economy adoption in Africa.
Nyambiya, I., Chapungu, L., Sawunyama, L., Musvoto, E. V., Nhamo, L., & Zvimba, J. N. (2025). Circular economy drivers, opportunities, and barriers, for wastewater services within low- and medium-income countries. Physics and Chemistry of the Earth, 138, 103871. https://doi.org/10.1016/j.pce.2025.103871
Oliver, G., Liehr-Gobbers, K., & Krafft, M. (2010). Handbook of Partial Least Squares. Handbook of Partial Least Squares, 691–692. https://doi.org/10.1007/978-3-540-32827-8
Psomopoulos, C. S., Kungolos, A., & Di Nardo, A. (2023). Advances in industrial waste reduction. Applied Sciences, 13(3), 1403. https://doi.org/10.3390/app13031403
Palm, E., Tilsted, J. P., Vogl, V., & Nikoleris, A. (2024). Imagining circular carbon: A mitigation (deterrence) strategy for the petrochemical industry. Environmental Science and Policy, 151(November 2023), 103640. https://doi.org/10.1016/j.envsci.2023.103640
United Republic of Tanzania (URT 2013). Tanzania Bureau of Statistics Ministry (2013). Tanzania in Figures 2012.
Ren, Y., Wu, K. J., Lim, M. K., & Tseng, M. L. (2023). Technology transfer adoption to achieve a circular economy model under resource-based view. International Journal of Production Economics, 264, 108983. https://doi.org/10.1016/j.ijpe.2023.108983
Riazi, F., Fidélis, T., & Teles, F. (2023). Fostering the transition to water reuse: The role of institutional arrangements in the European Union circular economy action plans. Water Management and Circular Economy. https://doi.org/10.1016/B978-0-323-95280-4.00012-6
Rossi, D., Lermen, F. H., & Echeveste, M. E. S. (2025). Hierarchical analysis of barriers to circular business models in the recycling industry, Environmental Technology, 46(4), 613-628. https://doi.org/10.1080/09593330.2024.2364308
Rweyendela, A. G., & Kombe, G. G. (2021). Institutional influences on circular economy: A Tanzanian perspective. 26, 1062–1073. https://doi.org/10.1016/j.spc.2021.01.013
Siqueira, M. S. S., Nascimento, P. O., & Freire, A. P. (2022). Reporting behaviour of people with disabilities in relation to the lack of accessibility on government websites: Analysis in the light of the theory of planned behaviour. Disability, CBR and Inclusive Development, 33(1), 52–68. https://doi.org/10.47985/dcidj.475
Solke, N. S., & Singh, T. P. (2018). Analysis of relationship between manufacturing flexibility and lean manufacturing using structural equation modelling. Global Journal of Flexible Systems Management, 19(2), 139–157. https://doi.org/10.1007/s40171-017-0181-5
Stumpf, L., Schöggl, J. P., & Baumgartner, R. J. (2021). Climbing up the circularity ladder? A mixed-methods analysis of circular economy in business practice. Journal of Cleaner Production, 316, 128158. https://doi.org/10.1016/j.jclepro.2021.12815
Takacs, F., Brunner, D., & Frankenberger, K. (2022). Barriers to a circular economy in small- and medium-sized enterprises and their integration in a sustainable strategic management framework. Journal of Cleaner Production, 362, 132227. https://doi.org/10.1016/j.jclepro.2022.132227
Trevisan, A. H., Lobo, A., Guzzo, D., de Vasconcelos Gomes, L. A., & Mascarenhas, J. (2023). Barriers to employing digital technologies for a circular economy: A multi-level perspective. Journal of Environmental Management, 332, 117437. https://doi.org/10.1016/j.jenvman.2023.117437
Vidal-Ayuso, F., Akhmedova, A., & Jaca, C. (2023). The circular economy and consumer behaviour: Literature review and research directions. Journal of Cleaner Production, 418, 137824. https://doi.org/10.1016/j.jclepro.2023.137824
Voorhees, C. M., Brady, M. K., Calantone, R., & Ramirez, E. (2016). Discriminant validity testing in marketing: an analysis, causes for concern, and proposed remedies. Journal of the Academy of Marketing Science, 44(1), 119–134. https://doi.org/10.1007/s11747-015-0455-4
Wang, C. W., & Chen, D. R. (2022). Associations of sugar-sweetened beverage knowledge, self-efficacy, and perceived benefits and barriers with sugar-sweetened beverage consumption in adolescents: A structural equation modeling approach. Appetite, 168(March 2021), 105663. https://doi.org/10.1016/j.appet.2021.105663
Xua, Z., Wang, Y., & Qian, Y. (2025). The design and application of in-depth interviews in primary care research. Chinese General Practice Journal, 2, 100062. https://doi.org/10.1016/j.cgpj.2025.100062
EJSICE has been approved for inclusion in DOAJ. The DOAJ listing of the journal is available at 
EJSICE is a member of 
EJSICE is indexed by 
EJSICE is listed in the ANVUR (Italian National Agency for the Evaluation of Universities and Research Institutes) as a scientific journal in AREA 13 - Economic and Statistical Sciences and AREA 14 - Political and Social Sciences. 
